Sectional and up & over door
Constructed to provide a maximum passage in both height and width while minimizing the space of the side posts and upper crossbar. Excellent solution for all new or renovated garages that measure very small between the walls.
It has no welded points. Parts are joined together by pressing and punching. Made of galvanized, skinpassed, primed, pre-painted galvanized steel sheet with polyurethane paint cured in oven at 140 °C “light ivory” color, manufactured according to EN 10147 and EN 10169 standards, corrosion-resistant, over 1,000 hours in static wet chamber according to TO9 ECCA standards.
Standard in light ivory white prepainted galvanized sheet metal, complete with a 50-micron protective film. Brown RAL 8017 and gray RAL 7035 finishes are available on request. All other colors are available with an electric spray that is applied during the painting process where the paint is baked in the oven. Variations on the sheet metal are available upon request: microperforated coat or slits on the door sash for increased ventilation.
The system is of the electromechanical type and is applied on the inner side of the door. Standard motors comply with the UNI 13241-1 standard and consist of motor of adequate power to connect to the power supply, quartz radio receiver, four-channel transmitter, courtesy light located on the motor block, external motor release (optional), internal motor release (standard), pair of photocells as standard.